Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N10E B1 Wireless-N150 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
System to its factory default settings. Power Press this button to power on/off the wireless router. Insert the AC adapter into this port to connect your router to a power source. LAN1-LAN4 Connect RJ-4 Ethernet cables to these ports to establish LAN connection. WAN Connect an RJ-4 Ethernet cable to this port to establish WAN connection. Login with the modem Asus RT-N10U with the following default ip address (192.168.1.1), username and password. Login with the modem Asus RT-N10 with the following default ip address (192.168.1.1), username and password.
Login data for the user interface
ASUS RT-N10E supports 802.11 b/g/n and has 150 Mbps high speed. With CD free easy installation and stable data transmission, (RT-N10E is the basic solution for wireless internet setup. It also contents Green WLAN technology so it consumes less power during stand by mode.
Rt-n10e Default Password
Preconfigured Wi-Fi settings
Access to the user interface
Rt N10e Default Password Settings
Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N10E B1, you have to do the following steps for access:
- Put router into operation
- Set up a connection between the device and the router via Wi-Fi* or network cable
- Open web browser
- Enter IP address in the address bar and confirm with ‘Enter’ key
- Enter username as well as password in the login form and confirm
* Make sure that your router’s Wi-Fi is activated.
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the ASUS RT-N10E B1 to its default settings, you have to do the following steps:
- Put router into operation
- Press Reset button and hold for at least 6 seconds
- Device restarts automatically
- Restoration of standard settings is finished
Execute software reset
With the ASUS RT-N10E B1, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.